Printer Status Messages - Brother HL-1660e Series User Manual

USER'S GUIDE
4–2

Printer Status Messages

The following table shows the printer status messages that are displayed
during normal operation:
Printer Status Message
00 READY 001P T1
00 IDLE 001P T1
AUTO LaserJet 5(4+)
HP LaserJet 5(4+)
00 BUSY 001P T1
00 SLEEP 001P T1
01 PRINT 001P T1
01 PR300 001P T1
01 SX 001P T1
02 WAIT 001P T1
04 SELF TEST
05 TEST PRINT
06 DEMO PAGE
06 PRINT CONFIG
06 PRINT FONTS I
06 PRINT FONTS C
06 PRINT FONTS P
06 CARD PRINT
Meaning
The printer is ready to print.
The printer is idle. (BR-Script 2 mode
only)
The printer is off-line and currently in HP
LaserJet mode under AUTO emulation
mode selected.
The printer is off-line and in HP LaserJet
mode under HP LaserJet emulation mode
selected.
The printer is busy. (BR-Script 2 mode
only)
The printer is in sleep status (power save
mode).
The printer is printing.
The printer is printing bydecreasing the
resolution from 600 dpi to 300 dpi
because of insufficient memory.
The printer is printing in simplex mode
due to insufficient memory for the
selected duplex mode.
The printer is warming up.
The printer is performing self-diagnosis.
The printer is printing the test pattern.
The printer is printing the demonstration.
The printer is printing the list of the
current printer settings.
The printer is printing the list of the
internal or resident fonts.
The printer is printing the list of the
optional fonts stored in an installed font
cartridge/card.
The printer is printing the list of the
permanent download fonts.
The printer is printing the contents of a
flash memory card or HDD card.