Brother HL-2700CN series User Manual page 123

5) Clean the area where the new transfer belt cleaner is to be installed with a dry cotton cloth.
6) Put the new transfer belt cleaner into the printer by gently placing the brass bearings into the
guides, and then pushing the handle down until the bearings click into place. Make sure the
transfer belt cleaner is free to move slightly upwards (rotating slightly around the bearings) in
the housing after you have installed it.
7) Put the transfer belt cleaner cover back in, and then close the top cover.
8) Turn the printer power switch back on.
5 - 18 ROUTINE MAINTENANCE
Figure 5-23
Figure 5-24