Replacing The 120K Kit - Brother HL-2700CN series User Manual

Replacing the 120K kit

1
Replacing the transfer belt cleaner
Both ends of the transfer belt cleaner roller consist of metal bearings that connect the bias element
to the power supply. These must be connected properly when you install the transfer belt cleaner.
Be sure to check how to connect them properly by looking at the old transfer belt cleaner before
you begin replacement.
1) Turn off the printer power switch.
2) Open the top cover of the printer.
3) Remove the transfer belt cover.
4) Remove the transfer belt cleaner by grasping the handle and lift it up.
Figure 5-20
Figure 5-21
Figure 5-22
ROUTINE MAINTENANCE 5 - 17