Accessories Tab - Brother HL-2700CN series User Manual

Accessories tab

When you install optional units, you can add them and select the settings for them in the Accessories
tab as follows.
4
1
You can manually add or remove the options for any optional device that is installed on the printer.
Tray settings will match the installed options.
2
RAMDISK
You can detect the capacity of RAMDISK that that has been set using the control panel. To find the
capacity of RAMDISK, tick the RAMDISK check box and then click Auto Detect.
For more information, see Reprinting from RAM on page 3-26.
3
Paper Source Setting
This feature recognizes the paper size in each paper tray.
4
Auto detection of printer options and RAMDISK
The Auto Detect function finds the currently installed optional unit devices and shows the
available settings in the printer driver. When you click the Auto Detect button, options that are
installed on the printer will be listed. You can manually add or remove options.
Auto Detect function may not be available under certain printer conditions.
2 - 8 DRIVER AND SOFTWARE
1
2
3