What Kind Of Paper Can I Use; Type And Size Of Paper; Suitable Paper Specifications - Brother HL-2700CN series User Manual

What kind of paper can I use?

Type and size of paper

The printer loads paper from the installed standard paper tray, optional lower tray, or the optional legal
tray.
Standard paper tray
Since the standard paper tray is a universal type, you can use any of the paper sizes (one paper size at
a time) listed in table 1 in Media type, paper size and number of sheets for paper source on page 1-11.
The tray can hold up to 250 sheets of paper (
up to the top line of the sliding guide).
Optional lower tray (LT-27CL)
The optional lower tray can hold up to 530 sheets of paper (
44 mm paper height.
Optional legal tray (LT-27LG)
The optional legal tray can hold up to 250 sheets of paper (75 g/
size paper, you must use this tray. You can use the optional legal tray as a standard paper tray (Tray 1).
See Legal tray (LT-27LG) on page 4-5.
The names for the paper trays in the printer driver and this Guide are as follows:
Tray and optional unit
Standard paper tray
Optional legal tray
Optional lower tray
Optional duplex unit for duplex printing

Suitable paper specifications

The following paper specifications are suitable for this printer.
75 g/m
Name
Tray 1
Tray 2
DX
2
Basis weight (g/m )
Thickness (µm)
Roughness (sec.)
3
Stiffness (cm /100)
Grain direction
Volume resistivity (ohm)
Surface resistivity (ohm-cm) 10e
Filler
Ash content (wt%)
Brightness (%)
Opacity (%)
2
) or up to 15 envelopes (paper can be loaded
or 20 lb
2
75 g/m or 20 lb
2
or 20 lb). If you want to print on legal
m
75-90
80-110
Higher than 20
90-150
Long grain
9 11
10e -10e
10 12
-10e
CaCO (Neutral)
3
Below 23
Higher than 80
Higher than 85
). The maximum capacity is
ABOUT THIS PRINTER 1 - 10