INTERFACE
Display Shows
SELECT
AUTO IF TIME
INPUT BUFFER
PARALLEL
USB2.0
RESET MENU
Display Shows
RESET PRINTER
FACTORY RESET
PARTS LIFE
Description
=AUTO/USB/PARALLEL/NETWORK
= 1:99 (sec)
You need to set the time-out period for the auto interface selection.
= Level1:15
Increases or decreases the input
buffer capacity.
When using the parallel interface
Subsetting
HIGH SPEED
BI-DIR
HIGH SPEED
Description
Resets the printer and restores all printer settings (including command settings) to
settings you have previously made with the control panel buttons.
Resets the printer and restores all printer default settings (including command
settings) to the factory settings. See List of factory settings on page 3-22.
Subsetting
OPC BELT
FUSER UNIT
120K KIT
PF KIT2
RESTART PRINTER?
Description
=ON/OFF
Turns high-speed parallel communications on or
off.
=ON/OFF
Turns bi-directional parallel communications on
or off.
=ON/OFF
Turns high-speed USB2.0 communications on
or off.
Description
Resets the OPC Belt parts life.
Appears when you need to replace the OPC
belt.
Resets the Fusing Unit parts life.
Appears when you need to replace the Fusing
unit.
Resets the 120K Kit parts life.
Appears when you need to replace the 120K Kit.
Resets the PF kit2 parts life.
Appears when you need to replace the PF Kit2.
CONTROL PANEL 3 - 17