Optional Fonts Package; Optional Fonts Package (Bs-3000); Optional Barcode Fonts Package (Bt-1000); Selecting The Optional Fonts - Brother HL-2700CN series User Manual

Optional fonts package

Optional fonts package (BS-3000)

The optional fonts package (BS-3000) is the CD-ROM you need for installing the 136 PS3 Agfa and
TrueType fonts.

Optional barcode fonts package (BT-1000)

The optional barcode fonts package (BT-1000) is the CD-ROM you need for installing the barcode fonts.

Selecting the optional fonts

After you have installed the optional font card, you can select optional fonts using any of the following
methods:
1
Through your application software
2
With a font selection command
3
With the control panel menu settings.
When you select fonts through your application software, follow the instructions specific to your software.
See your software manual if you need assistance. When you select fonts with a font selection command,
embed the font selection command in your program. See the Technical Reference Manual. Call a
Brother authorized service representative or Brother Customer Service for references to the Technical
Reference Manual.
When you select the fonts through your software or with a command, note the following:
You do not need to be concerned about the font control panel setting. The software or command
overrides the printer setting.
Be sure to install a font package that has the fonts you want. The printer automatically selects
the font that has exactly the same or similar characteristics as those you have set through the
software or with a command. If the installed font package does not happen to have a font of
similar characteristics, the printer will print in an unexpected font.
To select fonts with the control panel setting menu, follow these basic steps:
1
Menu
Press any of the
2
+ -
Press or until INFORMATION appears on the LCD display.
3
Set
Press to proceed to the next menu level, and then press
4
Set
Press to print the list of optional fonts (Figure 4-23).
5
Find the font number on the list.
+ - Set Back
buttons ( , , or ) to take the printer off line.
+ -
or until PRINT FONTS appears.
OPTIONS 4 - 16