Brother HL-2700CN series User Manual page 111

4
Hold the cartridge level with both hands and gently rock it from side to side three to four times to
spread the toner evenly inside the cartridge. Remove the tape labeled REMOVE and the orange
protective cover from the new toner cartridge.
Wait to unpack the toner cartridge until immediately before you put it in the printer. If toner
cartridges are left unpacked for a long time, the toner life will be shortened.
Put the toner cartridge into the printer immediately after you have removed the protective cover.
To prevent degradation to the print quality, do not touch the shaded parts shown in Figure 5-3.
5
Put in the new toner cartridge by positioning it in the guide. Slide it gently into the printer. Do not try
to push or lock the new toner cartridge in; it must rest loosely in the guide rails and will automatically
be properly positioned when the front cover is closed. Note that each color cartridge is individually
keyed to prevent improper installation. Match each cartridge color label to the same color label on
the printer.
6
Close the front cover.
5 - 6 ROUTINE MAINTENANCE
Figure 5-2
Figure 5-3
Figure 5-4
K
K
Y
Y
M
M
C
C