List Of Factory Settings; Network Factory Default Setting - Brother HL-2700CN series User Manual

List of factory settings

Table 1 shows the factory settings.
Different emulation modes will have different factory settings.
The following settings cannot be automatically restored to the factory settings by using the
FACTORY RESET in the RESET MENU menu - INTERFACE menu, HRC, PAGE
PROTECTION, SCALABLE FONT, LOCK PANEL, page counter and local language for display
messages.
The COPY setting is always restored to the factory setting when the printer is turned off and on.

Network factory default setting

If you wish to reset the print server back to its default factory settings (resetting all information such as
the password and IP address information), please follow these steps:
1
Turn off the printer.
2
Hold down the + button as you turn on the power switch. Keep the button pressed down until the
LCD display shows READY.
3
The print server has been reset to its default factory settings.
3 - 22 CONTROL PANEL