Reprinting The Last Job - Brother HL-2700CN series User Manual

Reprinting the last job

You can reprint the data from the last print job without sending it from the computer again.
If you want to cancel reprinting, press the Job Cancel button.
If the printer does not have enough memory to spool the print job data, it will print only the last
page. We recommend that you expand the memory when you want to reprint a large amount of
data. For more information on memory expansion, see SO-DIMM memory on page 4-1.
For information about the settings in the printer driver, see Job Spooling on page 2-6.
Reprint the last job three times
1
Turn the REPRINT setting ON by using the control panel buttons to go to the SETUP menu.
If you print using the driver we have supplied with the printer, the settings for Job Spooling in the
printer driver will take priority over the settings made on the control panel. See Job Spooling on page
2-6.
2
--MENU--
INFORMATION
--MENU--
REPRINT
--REPRINT--
COPIES= 1
--REPRINT--
COPIES= 3
PRINTING
--REPRINT--
COPIES= 1
Press the + or - button until the REPRINT menu appears (and to
display each setting shown below).
Press the Set button.
If PROOF, PUBLIC or SECURE
data exists.
Press the Set button.
Press the + button twice.
Press the Set button.
---REPRINT---
LAST JOB
CONTROL PANEL 3 - 27