Modified Drive Assembly; Flash Disk Module - Avery Dennison 686 User Manual

Modified Drive Assembly

Flash Disk Module

Users Manual Model 686 / 686 HT
The spring loaded drive assembly mounted in the 686 / 686 HT printer has been
modified to prevent it from being left in the "Drive Open" position. In addition the
drive open sensor has been eliminated. The drive can be opened, if necessary, to
clear a jam or remedy other problems, but must be held in the open position.
To aid in threading, the printer is equipped with a button controlled drive system.
The buttons are on the lower right side of the front housing.
To thread the printer, the stock should be pushed through the web guide and
printhead up to and touching the bottom of the blue roller.
Clear all errors on the front panel. Push and hold the upper button to move the stock
through the drive, knife, and into the stacker. The lower button will reverse the stock
if necessary.
The Flash Disk Module contains information that is loaded during power up only.
The Flash Disk Module may also contain logos, fonts, formats, and may even in the
future contain some operating system updates. Logos fonts and formats can be
copied to the Flash Disk Module using PCMCIA manager that is provided with
PcMate Platinum.
Printer Operation & Quick Set-Up • • • • 23