Changing Default Copy Settings
Press Menu and 3 to change default settings for Copy mode. These settings will
remain until you change them again by pressing Menu. Adjust the Contrast and
Quality settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press
save your selection. Press Stop/Exit—OR—Press
you want to change.
Press Menu, and 3.
1.COPY MODE
2.CONTRAST
Copy Mode (Type of Original)
You can select the Copy resolution for your type of original. The default setting
is AUTO, which is used for originals that contain both text and photographs.
TEXT
is used for originals containing only text.
photographs.
1
Press Menu, 3, 1.
2
Press
or
original (AUTO,
and then press Set.
3
Press Stop/Exit.
Copy Contrast
You can adjust copy contrast to make copies darker or lighter.
1
Press Menu, 3, 2.
2
Press
to make a copy lighter—OR—
to make a copy darker, and then press Set.
Press
3
Press Stop/Exit.
11 - 6
M A K I N G C O P I E S
to scroll through the options for each setting. Press Set to
or
AUTO
TEXT
PHOTO
-
to choose the type of
TEXT
or PHOTO),
to select the next setting
+
PHOTO
1.COPY MODE
2.CONTRAST
is default
is used for copying