Setting The Output Signal - Sony MVS-8000 User Manual

Knob
3

Setting the Output Signal

In the following adjustment/setting operations, use any of the following
methods to select the output signal before making the setting.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
The selected output signal appears in reverse video.
Adjusting the video clip
To adjust the clip value for each of the output signals from the Output 1 to 48
ports, use the following procedure.
1
2
Making vertical blanking interval adjustment and through mode
settings
1
154
Signal Output Settings (Output Menu)
Parameter Adjustment
Time Time
Parameter Adjustment
Output No Output port number selection
In the Switcher >Output menu, press [Video Clip].
The Video Clip menu appears.
The status area shows the output ports and assigned signals, and the white
clip, dark clip, and chrominance clip values.
Adjust the following parameters.
Knob Parameter Adjustment
2 White Clip Luminance signal white clip value
3 Dark Clip Luminance signal dark clip value
4 Chroma Clip Chrominance signal clip value
To set the values to the default values, press [Default].
In the Switcher >Output menu, press [V Blank/Through].
The V Blank/Through menu appears.
The status area shows the output ports and the assigned signals, the vertical
blanking interval, and the through mode Enable/Disable status.
Setting values
–32.00 to +96.00
Setting values
1 to 48
Setting values
90.00 to 109.02
–6.85 to +10.00
90.00 to 113.17