Sony MVS-8000 User Manual page 280

Icon Title Message
Restore Cannot find the File Name
Data, please load the File
Name Data first (–21).
Restore Files currently used for
playback cannot be restored.
Are you sure to want to restore
the FM files?
Set Time/ Error: Wrong Format.
Date
Trim The Start TC or Stop TC is not
properly set.
This file is locked.
This file is using for playback.
Warning No Switcher information
available.
Please confirm "Network
Configuration" on Page 7311.
Warning This operation will be
cancelled, because the register
is locked.
Please change the register
status to be unlocked first.
Description
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if the file list was not
loaded.
2547: Frame memory >File >Backup/Restore
In the above menu, [Restore] was pressed, but
movies (clips) currently being played back
cannot be restored.
7317: Engineering Setup >System
>Maintenance
In the above menu, an incorrect date and time
was specified. Specify the date and time
correctly.
2522:Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this
message appears if neither Start TC not Stop
TC is set.
2522:Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this
message appears if the interval between Start
TC (or Clip Begin) and Stop TC (or Clip End) is
the entire clip.
2522:Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this
message appears if the Start TC (or Clip Begin)
value is greater than the Stop TC (or Clip End)
value.
2522:Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this
message appears if the file is locked.
2522:Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this
message appears if the file is being played
back.
When starting up the menu system, the
switcher is not present in the system
information. Check the Data LAN connections,
and in Menu 7311: Engineering Setup >System
>Network Config, retry [Auto Config].
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store
>Edit
6411.1: Shotbox >Register >Store >Edit
In the above menus, an attempt was made to
store in a locked register. Unlock the register
before carrying out the store.
279
Error Messages