Making Switcher Processor Gpi Output Settings - Sony MVS-8000 User Manual

This confirms the setting, which appears in the status area.
Notes
• When the action is "Format," these settings conflict with the current
settings, but after making the settings, agreement is restored after a pulse
change or power off/on.
• When the Action is "Bkgd A Side Flags" or "Bkgd B Side Flags," the
levels are fixed, as follows.
High level: Off
Low level: On

Making Switcher Processor GPI Output Settings

1
In the Switcher >Device Interface menu, press [GPI Output].
The GPI Output menu appears.
2
Using any of the following methods, select the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
3
In the <Trigger Type> group, select the trigger polarity.
Status: Depending on the status, the relay contacts are closed or opened,
or the output is switched between high and low.
No Operation: The trigger has no effect on the output.
4
Turn the knobs to select the pulse width and timing to be set.
Parameter Adjustment
Port Port selection
(Rising Edge): The trigger causes the relay contacts to be open-
circuit or drives the output high, and holds this state for the
specified pulse width.
(Falling Edge): The trigger causes the relay contacts to be shorted
or drives the output low, and holds this state for the specified
pulse width.
(Any Edge): Each time the trigger occurs, the relay contacts are
alternately closed or opened, or the output is switched between
high and low.
Interfacing With External Devices (Device Interface Menu)
Setting values
1 to 8
179