Setting The Signal Format (Format Menu); Setting The Signal Format - Sony MVS-8000 User Manual

Setting the Signal Format (Format Menu)

To set the format, that is, the frame frequency and number of scan lines handled
by each device, use the System >Format menu.
To display the Format menu
In the Engineering Setup menu, select VF1 'System' and HF3 'Format.'
Notes
After changing any of the following settings, be sure to press [Execute] (or [FC
Format Execute] for changing the format converter signal format) to save the
new values. If you want to cancel the settings and return to the original state,
press [Clear] without pressing [Execute] or [FC Format Execute]. When you
press [Execute], some data is lost (such as frame memory images). If you press
[FC Format Execute], memory is not initialized, and this data is not lost.

Setting the Signal Format

Specify the signal format to be handled by the devices.
The combinations of signal formats that can be selected are as follows.
System
HD system
SD system
Software options for multi-format
To use the MVS-8000G with multi-format support requires the following
software options.
Field frequency Effective number of scan lines
50 1080i
59.94
60
23.976 1080PsF
24
25
29.97
30
50 720P
59.94
59.94 480i
50 576i
Setting the Signal Format (Format Menu)
21