Sony MVS-8000 User Manual page 271

Icon Title
HDD
Format
Import
Initial
Read
Install
Install
Install
270
Error Messages
Message
Success!!
System will be restarted.
Success!!
But some partitions cannot be
created because the capacity
of the HDD is not enough.
Cannot create the clip file,
because the number of
selected files is insufficient.
Initializing now...
No Task.
Select a package on the list.
(1) Please select the MKS-
8010A package on the list
(2) Please select the MKS-
8010 package (not MKS-
8010A) on the list.
Some files are skipped.
Not Found.
The software package does not
exist on the removable disk.
All processes have succeeded. 7316.10: Engineering Setup >System >Install/
Description
7317: Engineering Setup >System
>Maintenance
In the above menu, the hard disk formatting
procedure completed successfully.
Press [OK] to restart the system.
7317: Engineering Setup >System
>Maintenance
In the above menu, hard disk formatting was
completed normally, but because of insufficient
hard disk capacity, only the possible number of
partitions were created.
7162:File >All, External File >Import/Export
In the above menu, when importing a clip file,
this message appears if insufficient files are
selected to make up the clip.
This popup message appears during menu
startup, while system information is being read
in.
7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, the package for installation
was not selected. Select a package to be
installed.
7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, the menu software
installation package does not match the model
on which it is to be installed.
(1) This message appears when the MKS-8010
installation package is selected on the MKS-
8010A.
(2) This message appears when the MKS-
8010A installation package is selected on
the MKS-8010.
7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, some program files were
not installed, for example because the
hardware is not present. Check the skipped
files against the hardware configuration, to
confirm that the installation was completed
correctly.
7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, the software package to be
installed was not found. Check that the memory
card is correctly inserted, and try the installation
once more.
Unit Config >Install
In the above menu, the installation procedure
completed successfully.