Sony MVS-8000 User Manual page 184

• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 DME Ch No
Notes
• When using the MVE-8000A, it is not possible to select any of DME 1
Ext In to DME 8 Ext In.
• When using the MVE-9000 through the DME dedicated interface, it is
not possible to select DME 1 to DME 8 (video/key).
4
In the <Select> group, select the AUX bus or reentry to be assigned to the
DME channel.
Aux Bus: Set AUX bus.
Re-Entry: Set reentry.
5
Depending on the selection in step 4, use any of the following methods to
make the setting.
• Press directly on the list on the right of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
– When Aux Bus is selected
Knob Parameter
2 Src No
– When Re-Entry is selected
Knob Parameter
2 Src No
6
Press [Set].
In the list on the right of the status area, the selected content is reflected in
the specified DME channel.
Repeat steps 3 to 6 as required.
Adjustment
DME channel selection
Adjustment
AUX bus number
Adjustment
Reentry number
Interfacing With External Devices (Device Interface Menu)
Setting values
1 to 24
Setting values
0 to 48
Setting values
0 to 80
183