Overall Control Panel Settings (Config Menu); Panel Setup - Sony MVS-8000 User Manual

Multi format switcher system
Hide thumbs Also See for MVS-8000:
Table of Contents

Advertisement

Overall Control Panel Settings (Config
Menu)
To carry out the overall control panel settings, use the Panel >Config menu.
To display the Config menu
In the Engineering Setup menu, select VF2 'Panel' and HF1 'Config.'
The status area shows the "Bank numbers 1 to 4" (physical locations) of the M/
E and PGM/PST banks, the allocated bank names, and whether or not operation
is enabled.

Panel Setup

In panel setup, you carry out settings particular to the control panel.
You can make the following settings.
Panel settings (Config)
• M/E Assign: Set the logical configuration of the M/E and PGM/PST banks.
• M/E Operation: For each of the M/E and PGM/PST banks, make operations
possible, not possible, or disabled (Enable/Disable/Inhibit).
• Dual M/E Assign: Using two M/E banks, assign the shift and non-shift
button rows of a single M/E bank.
• Dual M/E Xpt Swap: When a setting has been made for Dual M/E Assign,
swap the shift and non-shift button rows.
• DSK Fader Assign: Carry out fader function assignment and key delegation
for the key delegation buttons, in each of the maximum of four downstream
key control blocks.
• External Bus Link: Make link settings relating internal switcher buses to
routing switcher destinations.
• Key Trans Link: Select whether or not to link transitions between keyers,
and if so which keyer to link to. You can set the links between keyers for each
M/E bank separately.
• Reference Module: When a trackball module and a joystick module are both
connected as device control blocks, select which is used as the reference.
• 10 Key Region Assign: Assign any regions to the region selection buttons
in the numeric keypad control block. Also used for setting the regions
included in the selection when the [All] button is pressed.
• Program Button: Make assignments for buttons of some control blocks
such as assigning the buttons in a transition control block for controlling a
VTR.
60

Overall Control Panel Settings (Config Menu)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mvs-8000sf

Table of Contents