Single Dump; Multi Dump - Access Virus Rack User Manual

í

Single Dump

[message]=
10 Single Dump
bb Bank Number
00 Single Edit buffer
01..04: Single Bank A..D
ss Program Number
0..127 [256 single bytes]
cs Checksum
optional
{F0,00,20,33,01,dd,10,bb,ss,[256 single
bytes],cs,F7}
. When bank number is set to 00, the
program number is the part number that
addresses one of the sixteen Single Edit
buffer in Multi Mode (00..0F) or the Sin-
gle buffer in Single Mode (40).
[256 single bytes] contains the Single
parameter pages A and B, each 128 bytes
long.
Checksum is the sum (DeviceID + 10 +
BankNumber + ProgramNumber + [256
single bytes]) AND 7F. A dump with a
wrong checksum will be received, but an
error message will appear on the display.
í

Multi Dump

[message]=
11 Multi Dump
bb Bank Number
00 Multi Edit buffer;
01 multi bank
mm Program Number
0..127 [256 multi bytes]
cs Checksum
optional
{F0,00,20,33,01,dd,11,bb,mm,[256 multi
bytes],cs,F7}
. When bank number 00, the dump
destination is the Multi Edit buffer. In
this case the program number is ignored.
[256 multi bytes] contains the Multi
parameters in a special succession. See
Multi Dump Table.
Checksum is the sum (DeviceID + 11 +
BankNumber + ProgramNumber + [256
multi bytes]) AND 7F. A dump with a
wrong checksum will be received, but an
error message will appear on the display.
ACCESS VIRUS RACK 207
System Exclusive Data