Multimode Parameters - Access Virus Rack User Manual

156 CHAPTER 16
The Parameters

MULTIMODE PARAMETERS

The MULTI mode parameters feature a
dedicated menu called the Multi Edit
menu. Access it by pressing the Multi
button while the device is in MULTI
mode. The LED located over the MULTI
button will light up to indicate that the
Multi Edit
menu is active. Press the MULTI button
again to return to normal Play mode. If
the device is in MULTI-SINGLE mode,
press the MULTI and SINGLE buttons
simultaneously to access the Multi Edit
menu. It suffices to press either the
MULTI or SINGLE button to return to nor-
mal Play mode from MULTI-SINGLE
mode.
. Please bear in mind the PART- and/or
MULTI-related parameters described in
the following are available in MULTI
mode only.
SELECT BANK Activates the bank for a
SINGLE PROGRAM for the current PART.
01111111111111111112
1 B36 101BASS RP
SelectBank
61111111111111111154
SELECT NUMBER Activates a SINGLE
PROGRAM for the current PART.
01111111111111111112
1 B36 101BASS RP
SelctNumber
61111111111111111154
PART ENABLE Switches the MIDI receive
mode of a given PART ON and OFF, i.e.
enables reception of MIDI data.
01111111111111111112
1 B36 101BASS RP
Part Enable
61111111111111111154
MIDI CHANNEL elects the MIDI channel
of the PART. If two or more PARTs are
selected for the same MIDI channel,
these PARTs will be played simulta-
neously. This creates what are generally
called layer sounds.
01111111111111111112
1 B36 101BASS RP
MidiChannel
61111111111111111154
B≤
36≤
On≤
1≤