Access Virus Rack User Manual page 161

In other words, if you set all Parts to
High, you're defeating the purpose of
this parameter. In this case, it wouldn't
have any effect since the priority of all
voices is the same.
01111111111111111112
1 B36 101BASS RP
ChanVolInit Off≤
61111111111111111154
KEYRANGE In MULTI mode, you can
limit the note range of individual PARTs.
Use the LowKey and HighKey parame-
ters to define the upper and lower limits
of the note range to which the PART will
respond. This lets you assign the sounds
of several PARTs that are addressed by
the same MIDI channel to different key-
board zones to create what are called
split sounds.
If, however, you adjust the two parame-
ters so that the value of LowKey lies
above that of HighKey, the note range
between these two high and low limits is
disabled and the PART will respond only
to notes the lie above and below this
zone.
. The two parameters may be entered
in the usual way via the VALUE buttons
and the VALUE knobs as well as directly
via keyboard. For the latter option, press
the VALUE buttons simultaneously and
then press the desired key on the key-
board.
LOW KEY Determines the lowest MIDI
note that the PART responds to.
01111111111111111112
1 B36 101BASS RP
LowKey
61111111111111111154
HIGH KEY Determines the highest MIDI
note that the PART responds to.
01111111111111111112
1 B36 101BASS RP
HighKey
61111111111111111154
ACCESS VIRUS RACK 159
Multimode parameters
C-2≤
G8≤