Access Virus Rack User Manual page 160

158 CHAPTER 16
The Parameters
(0 to +63), extremely low-level signals
are amplified. When you set values
greater than 0 for sounds that are
already fairly loud, you may hear unde-
sirable digital distortion.
01111111111111111112
1 B36 101BASS RP
PartVolume
61111111111111111154
CHAN VOLUME INIT This parameter
relates to the Channel Volume Controller
(#7). ChanVolInit lets you determine a
preset level that is activated when you
switch to this MULTI. This is an option
that works well for live applications, for
example to set volume levels that will
later be changed via an expression
pedal. When ChanVolInit is disabled (set
to OFF), the initial Channel Volume value
is retained when you switch to this
MULTI. This initial value may have been
determined by the expression pedal or
by the most recently active MULTI patch.
. Note: The Channel Volume Control-
ler never changes when you switch from
one SINGLE to another. It always retains
+0≤
the most recently set value.
01111111111111111112
1 B36 101BASS RP
PartDetune
61111111111111111154
N VOL RX ENABLE Switches a given
PART's MIDI receive mode for MIDI Con-
troller #7 (volume) on (Ena) and off (Dis).
01111111111111111112
1 B36 101BASS RP
MidiVolume
61111111111111111154
PRIORITY This parameter lets you control
how the Virus"steals notes when its
polyphonic performance is maxed out. In
the first position, "LOW", the voices of
all PARTs have the same priority when
one voice is switched off to accommo-
date a new voice. When you set the Pri-
ority of a PART to "High", the Virus will
not "steal" any notes from the voices of
this PART. Use this parameter sparingly.
+10≤
CHA
Dis≤