Lfo Section (Menu) - Access Virus Rack User Manual

LFO SECTION (MENU)

CLOCK When you set it to OFF, the LFO
oscillates in the normal manner, inde-
pendently of the global Master Clock
(CLOCK TEMPO). When you enter a note
value here, the LFO rate is synced up to
the global master clock. The length of
the waveshape's cycle will then corre-
spond to the note value that you have
entered. You can also set the rate via
CLOCK TEMPO (refer to the appropriate
section) or synchronize it to external
MIDI clock. When the LFO is synced up to
the master clock, you can also select the
desired note value via the LFO RATE
knob.
01111111111111111112
1 LFO1
Clock
61111111111111111154
MODE [XP]
POLY In polyphonic mode, each of the
voices involved is assigned a dedicated
LFO. The LFOs oscillate in different phase
positions for each voice. This livens up
the LFO modulation.
1/24≤
MONO In polyphonic mode, all voices
are assigned the same LFO. This accentu-
ates the LFO modulation, making it more
pronounced.
01111111111111111112
1 LFO1
Mode
61111111111111111154
[XP] ENV MODE Activates an operating
mode in which the LFO oscillates like an
envelope: The LFO cycles once only fol-
lowing the start of the note; the
response of the LFO shifts from bipolar
to unipolar. If the LFO waveshape S&H
(Sample & Hold) is active, then the LFO is
assigned a new random value with each
new note. This new value is valid for the
entire duration of the note.
01111111111111111112
1 LFO1
EnvMode
61111111111111111154
[XP] TRIGGER PHASE Selects the position
in the wave cycle - i.e. the phase position
- at which the LFO starts oscillating in
response to the start of a note. The con-
trol range of 1 to 127 is equivalent to
ACCESS VIRUS RACK 111
LFO Section (Menu)
Poly≤
Poly≤