Midi Dump Rx - Access Virus Rack User Manual

150 CHAPTER 16
The Parameters
ARRANGEMENT
and the SINGLE programs involved can
be transmitted in one go with this
option. To shorten the amount of time
that this dump takes, only the sounds of
those PARTs whose Part Enable option is
set to On are sent.
MULTI BANK
transmitted with this option. Please bear
in mind that, with this option, merely
the MULTI parameters and not the asso-
ciated SINGLE sounds are transmitted. If
you want to save all data of the Virus to
a sequencer, you can select the "Total"
dump option.
Once you have selected the desired data
type, the dump is initiated via STORE.
01111111111111111112
1 MIDI DUMP TX
SingleBank A≤
61111111111111111154
The current MULTI
All MULTI programs are
í

Midi Dump RX

If you want to send MIDI data to the
Virus, you don't have to log in first. The
Virus automatically accepts incoming
data via its MIDI In port. However, you
can determine where the data of a com-
plete incoming bank is stored. In con-
trast, single sound are always first
dumped in the Edit buffer; you have to
manually store them somewhere else,
otherwise they are deleted by the next
program change.
DISABLE Incoming data via MIDI IN is
ignored.
ENABLE Bank data is re-loaded to the
bank from which they were originally
dumped, regardless of which bank is cur-
rently selected.
FORCE TO BANK A Bank data is loaded
to Bank A exclusively.
FORCE TO BANK B Bank data is loaded
to Bank B exclusively
FORCE TO EDIT Loads the single pro-
grams of the bank to the Edit buffer one
by one, whereby the each preceding sin-
gle sound is deleted by the one follow-
ing it. This function treats a bank dump
as a succession of single sounds and
comes in handy when you want to search
an unfamiliar bank or load single sounds
without having to load the entire bank.