100 CHAPTER 16
The Parameters
í
Ringmodulator
VOLUME The ring modulator multiplies
the output of both oscillator 1 and 2 to
create interesting sounds with rich
enharmonic overtones. These overtones
are highly dependent on the frequency
coherence of both oscillators and it's
waveforms. The frequency coherence
can be changed, for instance use the
OSC2 SEMITONE parameter. If the RING-
MODULATOR VOLUME is zero, the ring
modulator is switched off. OSC VOL does
NOT affect the ring modulator level.
Therefore the original oscillator signal
can be levelled independently of the
ring modulator.
01111111111111111112
1 RINGMODULATOR
Volume
61111111111111111154
í
Noise
COLOR Determines the sound of the
Noise. Positive values emphasis on high
frequencies, negative values on the bass
frequencies.
MIDDLE
quencies are emphasised equally).
NEGATIVE
and emphasised on bass frequencies).
POSITIVE
noise, emphasised on high frequen-
cies).
0≤
01111111111111111112
1 NOISE
Color
61111111111111111154
Neutral (white noise, all fre-
Lowpass (pink noise, dark
Highpass (bright and thin
+0≤