About Effects; Delay/Reverb Effect Send; The Virus As An Effect Device - Access Virus Rack User Manual

184 CHAPTER 19
Tips, Tricks& Words Of Wisdom

ABOUT EFFECTS

í
Delay/Reverb Effect
Send
The Effect Send parameter works like a
classic aux send knob on a mixer (post-
fader), i.e. it adjusts the level of the glo-
bal DELAY/REVERB effect signal without
influencing the dry signal. However, the
dry signal is faded out in the final third
of the control range so that you can also
patch just the pure effect signal of a
MULTI Part through as you would it you
were using a conventional dry/wet effect
knob.
01111111111111111112
1 DELAY
EffectSend
61111111111111111154
í
The Virus as an Effect
Device
You're free to install the Virus into your
studio environment and use it as an
effect device or signal processor. For
example, simply connect its external
inputs to any available aux send bus or
effect send on your mixer or to the indi-
vidual outputs of a sampler or other
sound generator. This setup lets you mix
sundry signals outside the Virus and
patch the mixed signals into the Virus for
further processing.
73≤