Access Virus Rack User Manual page 124

122 CHAPTER 16
The Parameters
play notes in order to hear the external
signal source. For instance in this mode
you can manipulate the volume to "chop
up" the input signal much the way a
gate does. If you turn FILTER KEY FOL-
LOW up, the input signal is filtered by a
different filter frequency depending on
the key you press. The sound program
can still be played polyphonically and
you can allocate several different filter
frequencies and independent envelopes
simultaneously (!) to the input signal via
the keyboard.
STATIC Instead of the internal sound
sources, an external signal source is
routed to the filter section. In contrast to
DYNAMIC mode, in STATIC mode one or
Input
IN L
IN L+R
IN R
01111111111111111112
1 INPUT
Select
61111111111111111154
If the selected signal source is a stereo
source - i.e. IN L+R, - then the sound pro-
gram is automatically switched internally
to UNISON-MODE = Twin, regardless of
the UNISON MODE parameter setting so
that the input signal is processed in ste-
Meaning
The left channel of the external dual audio input.
Both channels of the external dual audio input (stereo).
The right channel of the external dual audio input.
In L+R≤
two voices (depending on the INPUT
SELECT setting, see appropriate section)
of the Virus are activated automatically
without you actually playing notes on
this PART. The filters and the amplifier
are switched permanently open, the
envelopes are deactivated and incoming
notes are ignored. Consequently you can
use the filters and the amplifier as an
effects section for the input signal.
INPUT SELECT Selects the external signal
source for the INPUT MODEs.
The signal source that you select here is
used also for the vocoder.
reo. In this case, the UNISON parameters
PAN SPREAD and LFO PHASE (see appro-
priate section) are active
Several PARTs can simultaneously access
the external input via INPUT SELECT.