Access Virus Rack User Manual page 154

152 CHAPTER 16
The Parameters
the Arpeggiator may no longer be able
to play correctly under these conditions.
To avoid this situation, route data via
another MIDI channel or switch off the
MIDI Thru function on your sequencer.
[XP] CLOCK RX This parameter activates
or deactivates the receiving of MIDI-
Clock globally. The Virus automatically
detects the presence of MIDI-Clock
(Auto). Therefore this parameter is not
intended to switch MIDI-Clock on, but to
switch it off if you should feel that this is
necessary (Off).
01111111111111111112
1 MIDI
ClockRx
61111111111111111154
CHANNEL VOLUME ENABLE Globally
switches the reception of Volume data
(Controller #7) on (ENA) or off (DIS).
01111111111111111112
1 MIDI
MidiVolume Ena≤
61111111111111111154
Auto≤
PROGRAM CHANGE ENABLE Globally
swithes the reception of Program
Change Data for SINGLE programs on
and off.
01111111111111111112
1 MIDI
ProgChange Ena≤
61111111111111111154
MULTI PROGRAM CHANGE ENABLE This
function controls if the VIRUS receives
program changes of multi-setups. If
enabled, the VIRUS switches an entire
multi-setup by a program change. The
global MIDI channel has to be used to
receive the program change. Please note
that the multi program change will not
work in the single-multi mode, because,
in this mode, the display is unable to
show the change.
01111111111111111112
1 MIDI
MultiPrgChg Dis≤
61111111111111111154
MIDI DEVICE ID Here you can enter the
identification number for system exclu-
sive data transfer. To enable communica-
tion between two Virus units - i.e. to