External Lfo Trigger; Filter Gain - Access Virus Rack User Manual

192 CHAPTER 19
Tips, Tricks& Words Of Wisdom
í

External LFO Trigger

You can also trigger an LFO at any time
by means of a controller, in other words,
restart its waveform cycle via remote
control. LFO1 mode (Ctr #70), LFO2
mode (Ctr #82) and LFO3 mode provision
controllers that you can use for this pur-
pose (Parameter B 9, see the parameter
documentation in the "Appendix" on
page 203).
í

Filter Gain

LFO1 lets you modulate the volume of a
voice. You'll find this function under
LFO1 Amount FILT GAIN in the LFO 1
menu. We deliberately positioned the
point of modulation prior to the filter
section, so that the degree of distortion
can be modulated at the same time
when you have activated the SATURA-
TION unit. Beyond that, you can use fast
LFO cycles to elicit brief impulses from
the oscillator signal (transients) in order
to excite resonance in the filters. In this
case, the filters will fade out freely since
their output signals are not affected by
the FILT GAIN volume modulation.
01111111111111111112
1 LFO 1
FiltGain
61111111111111111154
+2≤