Oscillators - Access Virus Rack User Manual

98 CHAPTER 16
The Parameters
FILT ENV -> FM It determines the inten-
sity at which the filter envelope controls
the frequency modulation (FM
AMOUNT). This as well as the previous
parameter are "relics" from the prede-
cessor model of the Virus. Modulations
such as these may also be implemented
via the Modulation Matrix (see the sec-
tion "ASSIGN" below).
01111111111111111112
1 OSCILLATOR2
FltEnv~Fm
61111111111111111154
í
OSC BAL Determines the balance
between the Oscillators 1 and 2 volume
level.
01111111111111111112
+0≤
61111111111111111154
VOLUME This knob has two functions:
In the left half of its control range up
to the center position (MIDI value 64),
OSC VOL determines the master volume
of the three oscillators prior to the filter
section input. The Noise Generator and
the Ringmodulator are not affected by
the master volume knob OSC VOL. Their
level is controlled separately in the
OSCILLATOR EDIT menu (see appropriate
section).
In the right half of the control range
from the center position to the far right,
OSC VOL increases the saturation inten-
sity (Gain) for the input of the SATURA-
TION stage (see appropriate section);
however this adjustment is compensated
post-SATURATION stage so that when
you adjust the gain you are not actually
increasing the volume, only manipulat-

Oscillators

1 OSCILLATORS
Balance 64≤