Multimode Parameters - Access Virus Rack XL User Manual

114
CHAPTER 8
The Multi Mode Parameters
Multimode param-
eters
The MULTI mode parameters feature a dedicat-
ed menu called the Multi Edit menu. Access it
by pressing the Multi button while the device is
in MULTI mode. The LED located over the MUL-
TI button will light up to indicate that the Multi
Edit menu is active. Press the MULTI button
again to return to normal Play mode. If the de-
vice is in MULTI-SINGLE mode, press the MUL-
TI and SINGLE buttons simultaneously to
access the Multi Edit menu. It suffices to press
either the
MULTI or SINGLE button to return to normal
Play mode from MULTI-SINGLE mode.
í
Please bear in mind the PART- and/or
MULTI-related parameters described in the fol-
lowing are available in MULTI mode only.
SELECT BANK
Activates the bank for a SINGLE PROGRAM for
the current PART.
01111111111111111112
1 B36 101BASS RP
SelectBank
61111111111111111154
SELECT NUMBER
Activates a SINGLE PROGRAM for the current
PART.
01111111111111111112
1 B36 101BASS RP
SelctNumber
61111111111111111154
PART ENABLE
Switches the MIDI receive mode of a given
PART ON and OFF, i.e. enables reception of
MIDI data.
01111111111111111112
1 B36 101BASS RP
Part Enable
61111111111111111154
MIDI CHANNEL
Selects the MIDI channel of the PART. If two or
more PARTs are selected for the same MIDI
channel, these PARTs will be played simultane-
ously. This creates what are generally called
layer sounds.
01111111111111111112
1 B36 101BASS RP
MidiChannel
B≤
61111111111111111154
OUTPUT SELECT
Several PARTs can simultaneously access the
external outputs via OUTPUT SELECT.In SIN-
GLE MODE, OUTPUT SELECT does not appear
in the menu; in this case Output 1 (stereo) is
36≤
On≤
1≤