Global Parameters / System Parameters / Midi Parameters; Midi Dump - Access VIRUS Owner's Manual

VIRUS Owner's Manual
DEFINABLE 2 MIDI
This is where you enter the MIDI Controller assignment for the DEFINABLE 2 knob. The Controller is
routed via MIDI Out for the purpose of controlling a connected MIDI device. The entry is only active
when DEFINABLE 2 MODE is set to MIDI.

Global Parameters / System Parameters / MIDI Parameters

The following parameters are global parameters and are accessible at any time in the CTRL
menu regardless of the current operating mode.
MIDI DUMP TX
This feature transfers the sound data of one Virus to another Virus, a computer or a hardware sequencer
via MIDI. The dump is executed via system exclusive data. You can chose from the following dump
options:
SINGLE
SINGLE BANK A
SINGLE BANK B
MULTI
MULTI BANK
Once you have selected the desired data type, the dump is initiated via STORE.
MIDI DUMP RX
If you want to send MIDI data to the Virus, you don't have to log in first. The Virus automatically accepts
incoming data via its MIDI In port. However, you can determine where the data of a complete incoming
bank is stored. In contrast, single sound are always first dumped in the Edit buffer; you have to manually
store them somewhere else, otherwise they are deleted by the next program change.
DISABLE
ENABLE
FORCE TO BANK A Bank data is loaded to Bank A exclusively.
FORCE TO BANK B Bank data is loaded to Bank B exclusively
60
The sound program of the current PART is sent from the Edit buffer.
All 128 sound programs of Bank A are sent.
All 128 sound programs of Bank B are sent.
The current multi program is sent.
All multis are sent.
Incoming data via MIDI IN is ignored.
Bank data is re-loaded to the bank from which they were originally dumped,
regardless of which bank is currently selected.