Other Functions - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features

4.3.5 Other functions

（1）
Clear Configuration
Clears the configuration data. From the TOP menu, select Configure and then Clear Configuration. When
Clear Configuration is executed, all the configuration data on the RAID Controller and Hard Disk Drives is
cleared.
If a hard disk drive contains old configuration information, creating configuration might fail. In this case, execute
Clear Configuration.
（2）
Force Online
Forcibly places a failed Hard Disk Drive online.
From the TOP menu, select Objects and then Physical Drive. Next, select the drive to be placed online, and
then select Force Online.
（3）
Rebuild Rate
Specifies the rebuilding rate.
From the TOP menu, select Objects, Adapter, and then Rebuild Rate.
The setting range is 0 to 100%. The default value is 30% (recommended).
（4）
Viewing Hard Disk Drive information
Displays information about a Hard Disk Drive.
From the TOP menu, select Objects and then Physical Drive. Next, select the drive whose information you
want to view, and then select Drive Properties.
106
Note
To delete the configuration data of a Virtual Drive, select Objects and then Virtual
Drive from the TOP menu. Next, move the cursor to the Virtual Drive to be
deleted, and then press the <Delete> key. When the confirmation message "Want
To Delete A VD?" appears, select Yes.
Express5800/B120e-h Maintenance Guide
4. RAID System Configuration