NEC Express5800 Series Maintenance Manual page 73

Chapter 2 Convenient Features
（5）
Storage Configuration submenu
From the Advanced menu, select SATA Configuration and then press the <Enter> key to display the menu
screen shown below. For the menu that has
key to show its submenus.
For details about the options, see the table below.
Option
SATA Information
SATA Mode
Hard Disk Pre-Delay
on the left, move the cursor to it and then press the <Enter>
Parameter
–
This option is not displayed when SATA Mode is set to
RAID Mode.
Disabled
Set SATA Mode.
IDE Mode
For the models that show RAID Mode, this option is only
AHCI Mode
for display.
[RAID Mode]
[Disabled]
The system waits the specified amount of time before
3 Seconds
accessing HDD devices during POST processing
6 Seconds
9 Seconds
12 Seconds
15 Seconds
21 Seconds
30 Seconds
Express5800/B120e-h Maintenance Guide
Descriptions
[ ]: Factory settings
1. System BIOS
73