Upon Installing Os - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
5.3

Upon Installing OS

[?] Unable to install OS
Is the Solid State Drive properly installed?
→
Make sure that the Solid State Drive is installed securely and that cables are properly
connected.
Did you configure the RAID Controller?
→
For the RAID System, use EXPRESSBUILDER or a RAID Configuration Utility (LSI Software
RAID Configuration Utility or WebBIOS) to properly configure the RAID Controller before
installing OS.
Did you create a Logical Drive?
→
For the RAID System, create a Logical Drive using EXPRESSBUILDER, LSI Software RAID
Configuration Utility, or WebBIOS to install OS.
[?] Unable to install Windows
Have you checked precautions for installation?
→
Refer to "Installation Guide (Windows)".
[?] A garbled message appears on the text-based setup screen during Windows installation and installation
cannot be continued
Are several storage devices connected? Or did you try to install Windows with the several Logical
Drives created under the RAID Controller?
→
Remove the storage devices other than the storage device on which the OS is to be installed,
and then install Windows.
→
If you want to install Windows on a disk under the RAID Controller, install the OS using
EXPRESSBUILDER. If important data is still on a Logical Drive, be sure to make a backup copy
of it before installation. If you want to create several Logical Drives, create additional Logical
Drives with the RAID System configuration utility after installing Windows.
[?] A product key was not requested
→
If you install using the backup DVD-ROM, entering the product key is not required.
[?] Unable to access the partition which was previously created after reinstalling OS while several disks are
connected
→
For details, refer to the Microsoft website below:
http://support.microsoft.com/kb/2497048/ja (Japanese Only)
[?] When Windows Server 2012 is installed while several disks are connected, the system partition and the
boot partition (leading area of 350 MB) are sometimes created in another disk
→
For details, refer to the Microsoft website below:
http://support.microsoft.com/kb/2530901/ja (Japanese Only)
[?] When Windows Server 2008 R2 is installed while several disks are connected, the system partition and
the boot partition (leading area of 100 MB) are sometimes created in another disk
→
For details, refer to the Microsoft website below:
http://support.microsoft.com/kb/2530901/ja (Japanese Only)
Express5800/B120e-h Maintenance Guide
5. Troubleshooting
33