NEC Express5800 Series Maintenance Manual page 87

Chapter 2 Convenient Features
（2）
Power Control Configuration submenu
From the Server menu, move the cursor to Power Control Configuration and then press the <Enter> key to
show its submenus.
For details about the options, see the table below (display only).
Option
AC-LINK
The table below shows the operation when the AC power is turned off once and then back on, in accordance
with the AC LINK setting.
System status before AC power was turned
Operating (DC power is On)
Abort (DC power is also Off)
Forced shutdown*
* Continue pressing the POWER switch for at least 4 seconds to forcibly turn off the power.
Parameter
Stay Off
[Last State]
Power On
off
Stay Off
Tips
If an uninterruptible power supply (UPS) is used for automatic operation, set the AC-LINK
to Power On.
Express5800/B120e-h Maintenance Guide
Descriptions
Specify AC link feature. Specify how the DC power state should
be when the AC power is supplied again after loss of power.
(See the table below)
AC LINK setting
Last State
Off On
Off Off
Off On
1. System BIOS
Power On
On
On
On
87