Menu Tree - NEC Express5800/E120g-M Maintenance Manual

Chapter 2 Useful Features
5.2

Menu Tree

Menu
Controller Management
> View Controller Information
Controller Marketing Name
Serial Number
PCI ID
Host Interface
Device Port Count
PCI Slot Number
Drive Count
Virtual Drive Count
Encryption Capable
Minimum Stripe Size
Maximum Stripe Size
Driver Version
UEFI Driver TimeStamp
> Change Controller Properties
Apply Changes
Set Factory Defaults
Set Boot Device
Rebuild Rate
Background Initialization (BGI) Rate
Consistency Check Rate
Disk Coercion
Disk WC
Read Ahead
Auto Rebuild
Auto Resume
> Clear Configuration
Virtual Drive Management
> Create Configuration
Save Configuration
Select RAID Level
Select Drives From
120
Value
LSI Embedded MegaRAID
none
Device-dependent
PCI-E
Device-dependent
Integrated
Device-dependent
No
64 KB
64 KB
30
30
30
1 GB
Disable
Enable
Enable
Enable
Express5800/E120g-M Maintenance Guide
5. RAID System Configuration
Descriptions
Display of the RAID controller information
Name of the RAID controller
Display may differ due to the restrictions
for the number of digit in the display
depending on the server.
Serial number of the RAID controller
PCI ID of the RAID controller
Host interface
Number of ports
PCI slot number of the RAID controller
Number of Physical Drives
Number of Virtual Drives
Encryption setting
Minimum stripe size
Maximum stripe size
UEFI driver version
UEFI driver build timestamp
Change of the parameter for the RAID
controller
Reflecting the change
Setting to the default value
Setting of the Virtual Drive to start up the
OS
Ratio of the Rebuild IO (30%)
Ratio of the Background Initialize IO
(30%)
Ratio of the consistency check IO (30%)
Forcibly pack physical drives of different
size
Setting of the physical drive caching.
The recommended setting is "Enable".
Read ahead setting
Automatic Rebuild setting
Setting whether or not to reboot the
system automatically when it is rebooted
during Initialize, Rebuild, or consistency
check.
Clearing the RAID Configuration
Creating the RAID Configuration
Storing the created configuration
Selecting the RAID level
Selecting the HDD creating the Virtual
Drive