Table of Contents
Advertisement
Chapter 2 Convenient Features
4.3.5
Other functions
(1)
Clear Configuration
Clears the configuration data. From the TOP menu, select Configure and then Clear Configuration. When
Clear Configuration is executed, all the configuration data on the RAID Controller and Hard Disk Drives is
cleared.
(2)
Force Online
Forcibly places a failed Hard Disk Drive online.
From the TOP menu, select Objects and then Physical Drive. Next, select the drive to be placed online, and
then select Force Online.
(3)
Rebuild Rate
Specifies the rebuilding rate.
From the TOP menu, select Objects, Adapter, and then Rebuild Rate.
The setting range is 0 to 100%. The default value is 30% (recommended).
(4)
Viewing Hard Disk Drive information
Displays information about a Hard Disk Drive.
From the TOP menu, select Objects and then Physical Drive. Next, select the drive whose information you
want to view, and then select Drive Properties.
108
• If the configuration data on the RAID Controller is selected while it does not
Note
match that of a Hard Disk Drive (excluding a case when the faulty RAID
Controller is replaced), configuration does not execute normally. In this case,
execute Clear Configuration and then create a configuration again.
• To delete the configuration data of a Virtual Drive, select Objects and then
Virtual Drive from the TOP menu. Next, move the cursor to the Virtual Drive to
be deleted, and then press the <Delete> key. When the confirmation message
"Want To Delete A VD?" appears, select Yes.
Express5800/R120d-1E, R120d-2E Maintenance Guide
4. RAID System Configuration
Advertisement
Table of Contents
