Control Switches; On/Off/Hold Open Switch (Will Not Operate Electric Lock); 4-Position Switch Ps-4C (Operates The Electric Lock) - Assa Abloy SW100 Installation And Service Manual

7.8

Control switches

7.8.1

ON/OFF/HOLD open switch (will not operate electric lock)

P/N: 1003582
Art. No. 1003582
Function
ON
OFF
HOLD
7.8.2

4-position switch PS-4C (operates the electric lock)

Art. No
655845
1005088-en-22.0
White
Green
Program
Impulses from activation units connected to XIMP are forwarded into inner impulse
(see page 44).
Impulses from activation units connected to XIMP are not forwarded into inner impulse.
These units cannot open the door.
The door is held permanently open.
Position Function
OFF The door is closed. The door cannot be opened with inner and
outer activation units. The door is locked if an electromechanical
locking device has been fitted. The door can be opened with a key
switch (if fitted).
EXIT Passage from inside only. The door is normally locked if an elec-
tromechanical locking device has been fitted. The door can only
be opened with the inner activation unit and with a key switch (if
fitted).
AUTO The door can be opened with the inner and outer manual and/or
automatic activators. The electric strike, if fitted, is open.
Normal pos-
ition
OPEN The door is held permanently open by the motor.
Issue 2021-02-24
Brown
7 Part identification & Accessories
23