11 Start-up
f
Close the door by turning the potentiometer SPTE to 0° and let the door close.
Note! Impulses are not accepted if SPTE is more than 0°.
SPTE
1
Micro switch
2
Lock kick cam
3
Stop block
4
Fine-adjustment screw
5
Door stop arm
11.2
Micro switch
Control the lock kick by turning the lock kick cam (2) when power is off. This lock kick gives a lock
kick at power failure for the last 3-10 degrees of closing to make sure that the door will fully close
and latch.
50
0°
5
2
Issue 2021-02-24
2
1
3
4
1005088-en-22.0