Installing A Wall Mount; Description; Additional Tools Required; Preparing The Wall Mount For An Indoor Installation - Bosch AutoDome Junior HD VJR Series Operation Manual

22 en | Installing a Wall Mount
5

Installing a Wall Mount

5.1

Description

This chapter details how to mount the AutoDome Junior to a wall. The AutoDome Junior is
also suitable for surface (Installing a Surface Mount, page 16), recess (Installing a Recessed
Mount, page 29), and pipe mounting (Installing a Pipe Mount, page 30). For specific
directions on mounting the unit, see the manual that came with your mount.
Notice!
The image sensors in modern cameras are highly sensitive and require special care for proper
performance and extended lifetime. Follow the guidelines for optimum results with your
camera:
Do not expose to direct sunlight or bright spotlights in operating and nonoperating
conditions.
Avoid bright lights in the field of view of the camera. Bright lights cause a "smearing" effect,
which is visible as white lines above and below the highlight. Prolonged exposure to bright
lights may cause bleaching of the sensor's color filters. This will be visible as colored spots in
the picture and is irreversible.
5.1.1

Additional Tools Required

–
–
–
–
5.1.2

Preparing the Wall Mount for an Indoor Installation

Use the following instructions to mount to an indoor wall.
4
Figure 5.1: Wall Mount Dimensions
1.
2.
2014.11 | 6.1 | F.01U.275.803
Appropriate straight slot screwdrivers
No. 2 Phillips screwdriver
Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable)
T-10 Torx wrench
Determine a secure location for the wall mount (supplied separately).
291.0
(11.46)
Fit a user-provided metal single-gang junction box to the wall.
Attach a grounded metal conduit to the junction box clamp.
366.0
(14.1)
333.0
(13.11)
220.4
(8.68)
Operation Manual
AutoDome Junior HD Series
Bosch Security Systems, Inc.