Table of Contents
Advertisement
6.
7.
8.
9.
Adapter Plates
Each model of floor box requires a specific pair of provided adapter plates to secure the
device to the box (see the table below for the appropriate adapter plates to use with specific
floor boxes).
Floor Box
Ackermann GB3 (OBO Bettermann)
MK Electric CableLink Plus Single Pan
MK Electric CableLink Plus Modular
Electraplan
PUK
NOTE: The 995242 adapter plate is only used for position 2 of the Ackermann GB3
1.
Connect cables to the side panel connectors located below the adapter plates (see
Connectors and Switches Below the Adapter Plates
Mount the DTP2 T 202 FB to the floor box (see
Connect appropriate devices to the remaining side connectors (see
Above the Adapter Plates
Features
on page 11).
Configure the DTP2 T 202 FB with SIS commands (see
Set Control
on page 21) or the Product Configuration Software (see
Configuration Software
on page 28).
(OBO Bettermann) floor box.
Determine the position in the floor box to install the DTP2 T 202 FB. Each compatible
floor box contains three positions to install devices (see
NOTE: For the MK Electric CableLink Plus Single Pan floor box, do not use
position 2.
Mounting
on page 10) and top panel connectors (see
Adapter Plate
995241
995242
995243
995244
995300
995300
figure 2
DTP2 T 202 FB • Installation and Operation
on page 7).
on page 11).
Connectors
Top Panel
Simple Instruction
Product
Example
on the next page).
5
Advertisement
Table of Contents
