Step 1: Specifying Test Settings - JDS Uniphase HST-3000 User Manual

Chapter 2 VDSL Testing
Testing Data services
Step 1: specifying
test settings
Setting
Test Type
Test Port
Protocol
Test Duration
IP TOS Field
54
that they are investigating. For example, to test video the user
shall be able to set the transmission type to UDP and set the
packet size to 1400 or whatever is appropriate for their
network. The test statistics help determine if the service being
deployed can be supported on the network. This test operates
over a PPPoA, PPPoE or IPoE connection, using the Ethernet
TE, ADSL, or VDSL link.
JDSU QoS is an optional feature. The setup and test items
described below will appear only if your unit is equipped with
the option.
There are three setup pages for JDSU QoS: Test Settings,
Server Settings, and QoS Threshold Settings. Before using
JDSU QoS to measure throughput, all settings must be spec-
ified.
To specify test settings
1 If you haven't already done so, launch the VDSL applica-
tion.
2 Press the Configure navigation key.
3 Press the QOS TEST soft key and then specify the test
settings. You may have to scroll right or left to find the soft
key.
Description
Specify whether the test will Download, Upload, or both.
Specify the port used for the QoS test.
Specify whether UDP or TCP protocol is used for the test.
Specify the test duration in number of seconds, between 5
and 300 seconds (5 minutes).
Specify the Type of Service (TOS) byte. This is a whole
number between 0 and 255.
HST-3000 VDSL Testing User's Guide