Updating The Modem Software - JDS Uniphase HST-3000 User Manual

Chapter 1 Getting Started

Updating the modem software

Updating the modem software
8
3 Select Options/Revs/Copyright.
4 Press the REVISIONS soft key.
5 Find the line that looks similar to the following (you may
have to scroll to find it):
SIM, IK VDSL
The two digits preceding "VDSL" identify the chip set.
IK = Ikanos
(or it may be spelled out: Broadcom)
Depending on your installed options, the line may include
additional information following "VDSL", such as "WB2" or
"DVOM".
NOTE:
For additional information about HST-3000 options, SIMs,
and services, contact your local JDSU representative or
contact JDSU through the company web site,
www.jdsu.com.
The TI and Infineon SIMs allow you to upgrade the firmware
for the modem and data pump. You may get a pop-up menu
when launching ADSL Modem mode asking you to update the
firmware.
To update the modem driver
1 Locate the correct modem driver.
It may be on a USB stick (top-most directory), on a FTP
site, or something similar.
2 Press the Display soft key, and then select Identity.
HST-3000 VDSL Testing User's Guide
CX = Conexant IN = Infineon