Throughput Testing; Measuring Throughput Using Jdsu Qos - JDS Uniphase HST-3000 User Manual

5 Press the Actions soft key.
6 Select either Log-Off or IP-Release.
Throughput
Using the FTP/HTTP throughput feature, you can perform a
file transfer to test the throughput of the circuit.
testing
To test throughput
1 Specify the FTP/HTTP settings (see
2 Navigate to the FTP/HTTP results screen.
3 Press the Actions soft key.
4 Select FTP/HTTP and then Enter Address.
5 Enter the address using the keypad, including the prefix
6 Press OK to begin the file transfer.
Measuring
JDSU QoS (also called Iperf) is a method of qualifying copper
lines to verify the throughput supported for the copper wire for
throughput
voice and video traffic. This is a network testing tool that can
using JDSU
create TCP and UDP data streams and measure the
QoS
throughput of the network carrying them. It allows the user to
set various parameters in order to tune the test for the service
HST-3000 VDSL Testing User's Guide
The IP results window appears.
The Log-Off and IP-Release options are only available
when you are viewing the IP results window.
The IP address is now available for use in other applica-
tions.
HTTP settings" on page
(ftp: or http: or, if applicable, https:) and the filename.
For example, ftp://10.0.0.1/name
The throughput results appear on the screen.
See "FTP/HTTP results" on page 80
interpreting the results.
Chapter 2 VDSL Testing
Testing Data services
"Specifying FTP/
48).
for information on
53