Casio IT-800 Series Software Manual page 98

2.4.2 Capturing Images
Capture Static Image and Save in File
This function captures single static image and then outputs it in JPEG format file.
Table 2.72
Item
Image size to capture
File format
After calling the static image capture function, there is a time-lag of approximately 400
milliseconds until when an image is actually captured. The camera driver notifies the operator of
the terminal that the image has been captured with the shutter sound. Focus adjustment can be
performed using the Auto Focus function and the fixed-focus switch (10 levels), thereby enabling
the operator to capture a focused image.
Notes:
• Prior to capturing static images, secure the sufficient memory size (recommended 2Mbytes or
more) remained in storage where the captured static images are stored.
• When temperature of the LED becomes high, for safety, capturing images with flash function
by using the LED and the functions that controls ON/OFF of LED illumination will not be
operable.
Mode
UXGA
Quad-VGA
XGA
SVGA
VGA
1/4VGA
JPEG file
98
Setting Parameter
Portrait
Width Height
1200 1600
960 1280
768 1024
600 800
480
640
240 320
Landscape
Width Width
1600 1200
1280 960
1024 768
800 600
640 480
320 240