Casio IT-800 Series Software Manual page 273

4.16 Internet Sharing
This application enables your PC to use the terminal as a modem for connecting to the Internet.
Figure 4-34
If your terminal has a data connection plan, your PC can use the terminal to connect to the
Internet.
To use the terminal as a modem using a USB cable, follow the steps below.
1. On your PC, open ActiveSync, and navigate to File → Connection Settings.
2. Clear the Allow USB connections checkbox.
3. Connect the terminal to the PC using a USB cable.
4. On the terminal, navigate to Start → Programs → Internet Sharing.
5. Select USB in the PC connection pull-down menu.
6. Select the Network connection that the terminal should use to connect to the Internet.
7. Tap Connect. Allow approximately 30 seconds for the connection to be established.
273