Casio IT-800 Series Software Manual page 38

The functions of the Laser Scanner Library relevant to the Scanning Method are as follows.
OBRStartScanning
OBRStopScanning
OBRSetScanningType
OBRGetScanningType
OBRClose
OBRSetScanningCounter
OBRGetScanningCounter : Retrieves the no. of times for continuous scanning.
OBRSetScanningTimeout
OBRGetScanningTimeout : Retrieves timeout of scanning complete.
Multi-step Scanning
This method is for scanning a designated number of bar codes. Once scanning for the designated
number of bar codes has been completed, the scanner closes and not scan again until reopened.
Also, the same bar codes that have been scanned previously cannot be scanned again.
The functions of the Laser Scanner Library relevant to the Multi-step Scanning are as follows.
OBROpen
OBRClose
OBRSetScanningCounter
OBRGetScanningCounter : Retrieves the no. of times for continuous scanning.
OBRSetMultiStepReading
OBRGetMultiStepReading : Retrieves the no. of bar codes to scan in multi-step scanning mode.
: Emits laser beam and start scanning a bar code.
: Stops emitting laser beam and scanning a bar code.
: Sets up scanning mode.
: Retrieves the scanning mode.
: Sets up scanning disable status.
: Sets up the no. of times for continuous scanning.
: Sets up a time period of timeout for scanning complete.
: Sets up scanning enable status.
: Sets up scanning disable status.
: Sets up the no. of times for continuous scanning.
: Sets up the no. of bar codes to scan in multi-step scanning mode.
38