Casio IT-800 Series Software Manual page 124

File Format
The file format of configuration file is INI format which follows restrictions described below.
• The maximum size of the configuration file is 60 Kbytes.
• A line starting with ";" is regarded as comment. It does not regard as comment if located in
mid-line.
• The separator for KEY and VALUE is "=". Space and tab, etc., also are included in either
KEY or VALUE. If a space is inserted after "=", for example, in "SSID= tunami", the SSID
value includes the space (" ")+tunami.
• At the end of line, CR/LF or CR or LF must be attached.
• The maximum length of line is 256 bytes.
• Section name, KEY and VALUE are not case-sensitive.
WLAN Section
General setting for the WLAN settings is made in this section.
Table 2.94
KEY
WLANPOWER
POWERSAVE
WLANCFG
RoamingRSSILevel
RoamingAvailableTime Set time period in second to start roaming again.
RoamingRSSISpan
BandConfig
MAX_SCAN_TIME
SCAN_CHANNELS
WLAN_CFG_TOOL
Set turning the power to the integrated WLAN module on or off.
1: Power ON
0: Power OFF
Set the power save mode effect selecting either value.
1: Enable the power save.
0: Disable the power save.
Enable or disable the configuration file.
1: Enable the file.
0: Disable the file.
Set roaming threshold value in dBm.
Set difference of roaming radio wave intensity in dBm.
Set communication speed selecting either value.
0: IEEE802.11b
1: IEEE802.11 b/g
Set time period per channel in millisecond to seek Access-Point.
Set channels in successive hexadecimal codes to use.
Example
123456789ABCD : Choose all channels.
16B : Choose 1Ch, 6Ch, 11Ch.
Select a tool, either NETUI or WLANCONFIG, that appears when the
WLAN icon is selected.
124
VALUE